MULTIPRO is a pneumatic brushing equipment for the cleaning of exhaust ducts in kitchens and industrial environments.
multipro
Project Description
THE ULTIMATE SOLUTION IN EXHAUST DUCT CLEANING
Thanks to the connection with an ifoam foam generator, a dense foam is projected and adheres to the duct walls to dissolve the grease.
The duct is then rinsed for a perfect finish.

WHY MULTIPRO?
- It has been the reference equipment for exhaust duct cleaning for more than 15 years.
- The remote control and the real time visualization set make Multipro unique in the market.
- 30 meters of semi-rigid hose to work vertically, horizontally, and to make 90º elbows.
Motor supply (Maximum power) | 300 l/min – 6,3 bar // 10,6 cfm – 6,3 bar |
No-load rotational speed: | 500 r.p.m. |
Stall torque: | 11,6 Nm | 102,7 lbf.in |
Noise level | < 70 dB |
Length of hose | 30 m | 98 ft | 1181 inch |
Direction rotation | Right | Left |
Control system/td> | Electropneumatic |
Structure material | Stainless steel and HDPE |
Dimensions (L x W x H) | 1118 x 440 x 1172 mm // 49 x 17 x 46 inches |
Total weight | 73 kg // 161lb |
OPTIONAL ACCESORIES
REMOTE CONTROL
The wrist remote control allows a single operator to perform the cleaning of the extraction system.

VISIOPRO
Visualizes in real time the inside of the duct. Allows the capture of high definition videos and photos during cleaning.

BRUSH CENTERING DEVICE
Allows the brush to be centered in the duct, thus exerting equal pressure on the entire diameter of the duct and avoiding lurching.
The wheels offer a better sliding.

TEGRAS BRUSHES
Discover the most extensive guide of brushes for exhaust ducts on the market.
Discover DUO SQUARE for square ducts

EXTREME BRUSHES
Brushes designed to face the most demanding cleanings in ducts of extraction systems

Comments are closed.